HOME DZINE Bathrooms | How to install a shower door
How to install a shower door You will need: Pivot shower door kit Impact drill, masonry and HSS drill bits Tape measure and pencil 1 metre spirit level Metal file Rubber Mallet and hammer Nail punch Silicone sealer fischer Wall plugs Stainless steel pan -head screws (if not supplied) Here's how: 1. Cut the base track to length Measure the length of the shower threshold , then use a hacksaw to cut the aluminum base track to fit tightly between the previously built stall walls . Smooth the cut end with a file. Vacuum up the metal filings immediately so they don’t scratch the bathroom floor or shower base. 2. Set the base track Place the track on the threshold and use a tape measure to make sure that it’s centred from front to back. With a pencil, mark the threshold along the edge of the track near each end. This allows easy repositioning if it slides around during installation of the jambs. 3. Mark position of the hinge-side jamb On the side of the shower opening that will suppor...